The rolling oxidation skin of marvellous to rolling on the rolled steel skinning machine of Schumag company steel undertakes purify. The diameter of the marvellous steel that should undertake flay is machined is 5~450mm. Send makings roller to send stock to automatic lathe. Must ensure marvellous when the cutting force that is as high as 100000N steel wants to be entered continuously makings. The clamp sleeve of use Lenze company will connect those who live alloter gearing drive to send makings roller to tighten solid to be on drive axis. It is OK to use bit easily cutting fruit and vegetable, but the confidential of rolled steel flay of the Schumag company that is located in Achen assumes more difficult job. They want the oxidation skin on purify rolling marvellous steel. The marvellous steel after decorticating is very bright and clean, can be as silver-colored bright steel in auto industry use as piston lever and axis process the data that wait. In addition, the semifinished product that still can make as the semifinished product of compressor or general accuracy machine tool is used. The machine of Schumag company can machine a diameter to be the marvellous steel of 5~450mm, as great ability, winding perhaps into wire rod. Those who pass turning come off treatment flow, can achieve the exterior fits tolerance of IT 8 ~IT 11. Send makings roller to send material to automatic lathe, can make marvellous steel does slight helical whirligig at the same time. Left: Axis - sleeve join makes a trade in machinery is the standardization join means with most application, so that deliver torsion to rotating sleeve from axis or journal,go up right: The rolled steel skinning machine of Schumag company is OK the material of the life that the rolling oxidation skin on purify round steel sends makings roller and marvellous steel and applied circumstance have very big concern, if cutting force is as high as 100000N when (when processing high strenth data) undertake sending continuously expecting to marvellous steel. As a result of this kind of reason, roller often can be worn away, because this wants,change regularly. Sleeve of hydraulic pressure clamp is installed directly when special applying work to undertake essential care and maintenance on the machine, need puts out a machine to halt production. Sleeve of clamp of use hydraulic pressure can compare rigid clamping apparatus spare very much time. Sleeve of the ETP HYLOC of use Lenze company clamp is OK send makings roller clamp to be on drive axis those who adopt alloter gearing drive. It is OK to should be operated through simple handle only loosen sleeve of ETP series clamp or new clamp. Such, sent makings roller to create fundamental condition to change immediately. The axis of Lenze company - sleeve - the applied circumstance that assorted texture differs according to its can have different configuration. The ETP-Classic of stainless steel material, - Express and - Mini structure is special apply to food industry and flow industry application. Clamping unit can pass attrition obstruction to transfer very tall torsion and axial power without space land. For example, axis of 100 gripping sleeve canister (the diameter is 100mm) can deliver when installation pressure is 100MPa 24. The torsion of 2kNm. Of axial force deliver for 485kN. Through be opposite sleeve undertakes HFC (tall wear-resisting coating) finishing, these numerical value still can rise further. Hydraulic pressure principle: If piston and pump move in a direction, sleeve can expand, the sleeve of even exterior pressure clamp that forms countershaft and roller can assume safe function to install pressure to be able to change the torsion that should deliver through the change conversely. Its advantage is: With appearance fixed join photograph is compared, ETP series product also can assume safe function. When in stock accumulation jams or rupturing, if exceed modulatory pitching moment peak value, sleeve can skid. ETP series product can satisfy an user to be opposite the demand with the higher and higher side such as the lesser installation dimension, good movement stability below movement of machine high speed and better oscillatory performance. Attend the meeting the arris that the stress that causes height centers bolts join photograph is compared, sleeve of hydraulic pressure clamp can accumulate machine component bedding face quake force to close coadjacent rise, can be in so produce load to hand in when change or fluctuating, prevent the deflection that occurrence connective clearance, arris bolts, be an axis even rupture wait for a phenomenon. Sleeve of clamp of hydraulic pressure of sleeve of hydraulic pressure clamp has all sorts of different type. The model of stainless steel is particularly important to food industry and flow industry. The ETP that Lenze company offers for Schumag company - HYLOC product can get used to those who have very high radial load the most difficult production condition. Can use hydraulic pump adjustment to install pressure to change the torsion that need delivers neatly. Use threaded coupling can join pump be used on gripping sleeve canister immediately. Although be when axial diameter is bigger,install time very short also. Use this kind of principle to be able to form very tall torsion, make unit of this kind of link OK also apply in shipbuilding industry and branch of other heavy industry. CNC Milling